Ready to use for permanent construction worker

The blocforTM 10 ESD self-restoring fall arrest system is particularly well suited for all types of vertical and horizontal movement.
It makes it easy to move horizontally on congested surfaces such as flat roofs or industrial sites.

CHARACTERISTICS :

• M10 connector to connect the fall arrest to the anchor point.
• 25mm anchor: allows to receive other connectors of large diameters
• M47 trunnion connector to connect the fall arrest to the harness: avoids a bad positioning on the point of attachment of the harness.
• Galvanized cable: Length 10 meters, Ø 4,75mm
• ESD absorption system: provides the user with an impact of less than 600daN even if the latter drops when the cable is fully unwound.
• Plastic casings in ABS filled polyamide: Anti UV, resistant to shocks and aging.
• Lightweight: less than 5 kg
• Complies with CNB / P / 11.062 for use above 100 kg.
• Complies with CNB / P / 11.060 for horizontal use.

The HT55 A harness is a harness of great versatility.
It is particularly well suited for building work (ladders, scaffolding, roofing, etc.) thanks to its sternal attachment point.
The comfort of use of this harness is ensured by the X-Pad comfort backrest, the mountain bibs and the articulation of the braces and leg straps by connecting loops.

• 1 dorsal attachment point: large ring facilitating hooking. Recommended for vertical movement or scaffold work.
• 1 sternal attachment point: recommended for work on an incline or in a nacelle.
• Adjustment loops: non-removable adjustment bars that prevent slipping of the strap.
• 1 comfort pad X-pad: Permeable, flexible and structuring, it allows easy installation of the harness.
• 2 comfort shorts: avoids crotch friction.
• 2 link bars: leave a freedom at the top and bottom of the harness
• 1 gluteal for a better comfort
• 4 fall indicators: Improves the safety of the harness.
• AUTOMATIC buckles
• Complies with EN 361
• Complies with CNB / P / 11.062 for use above 100 kg.